Saturday, December 19, 2015

Hudson Bay: Spare Parts



I hopped on the bike at 7:30 - a bit later than ideal, but I was well ahead of schedule, so I wasn't concerned.  This would be a pleasant, easy day of cruising through North Dakota and most of Montana.  I turned the key and punched the starter button on the right handlebar - and nothing happened.

I checked the kill switch, but it was still in the on position.  The headlight was shining, so it probably wasn't the battery.  My next thought was of the side stand safety switch.  It automatically disables the system if you try to start the bike when the kickstand is down and the transmission is in gear.  Problem is, they can fail, and won't allow you to start the bike no matter what position the stand is in.  I bought a bypass circuit before the trip, but hadn't taken the time to install it.  I had packed it with me, however - just in case. 

It was beginning to look like I'd be spending my morning working on the bike, when another idea popped into my head.  I pulled in the clutch, and punched the little button again.  VROOM!  That was it!  The bike was just in gear.  I normally park with the transmission in neutral, but that night I'd left it in first because it was on a fairly pronounced incline, and I didn't want it to roll backwards.


After crossing an elegantly simple bridge over Lake Sakakawea (previous photo), the landscape became more rolling, and the road less straight.  I'd been warned not to head for Keene, so that I could avoid a long stretch of construction.  So far, though Highway 22 was longer, it had been a very pleasant detour.


But eventually, I had to turn west again, and into a very slimy construction zone.  It doesn't look that bad, but it was actually worse than most of the unpaved road to Gillam had been.  Fortunately, there was basically no traffic, and I was able to take my time.  There were also no signs, and at one point, I caught up with that truck at an intersection, and we discussed which might be the road to Watford City.


Eventually, I found Highway 85, and turned south towards Theodore Roosevelt National Park.  This is the entrance to the North Unit.  Farther from the freeway, it's the lesser visited of the two.


If you've never heard of it, don't feel too bad.  It's probably one of the least visited of the entire National Park system.  I didn't know what to expect, but I'd chosen my route through North Dakota, primarily to end up here.


Basically, this unit consists of a campground and a 14-mile out and back scenic drive through badlands and grasslands.  It was the perfect morning for it, as the weather was clear, and traffic consisted only of myself and this fellow rider.


I wasn't expecting any gravel, but this short stretch, including a switchback, made the ride even more enjoyable. 


This overlook of the Little Missouri River was not quite the end of the road, but the day was heating up fast, and I wanted to get to Montana before taking a break in the early afternoon to do some laundry.


On my way back down, a car was stopped right in the middle of the opposite lane.  Figuring he'd spotted some wildlife, I slowed and searched the plains to the north, but couldn't see anything.  Just as I passed the car, I caught a glimpse of this bison, not more than 20 feet from me, his rear end blending in with the color of the hillside!


Between the park units, this corner of North Dakota is dominated by the Little Missouri National Grassland.  On its fringes, there is economic development in at least two forms.  On the far right, you can just barely see a tractor in a harvested field.  On the left, you can see two pumping oil wells.  North Dakota is doing pretty well these days, no pun intended, but I'm still not sure I'd want to live there.  The contrast between the blue sky, white clouds, and green grass that morning, however, made for a visual treat.


Down on Interstate 94, which slices through the bottom half of the state, I turned west again, and descended into a landscape that reminded me of parts of western South Dakota, with which I am much more familiar.


By the time I got to Old West looking town of Medora, at the entrance to the South Unit of the park, it was incredibly hot!  Stopping for gas, I had to wait in a long line of tourists.  On the plus side, I ran into a European who had just bought a KTM and wanted to know all about the best places to ride in the West.  He was car bound that day, but we chatted in the shade for a few minutes, while the bike and I cooled down.


The line to enter the park was even longer than the line at the pump.  There was no way I was going to endure that kind of torture, just to be stuck in a slow parade, even after getting in!  Instead, I visited a couple of sites that were right near town - like this enormous brick chimney, all that remains of one of the places Roosevelt stayed while hunting in the area.


Medora was more than a bit of a tourist trap, but it's probably worth another go - in the spring or fall!  I pulled off the freeway in Glendive or Miles City, Montana - primarily to cool off, and chug down a tasty cold one.  That's right, I didn't need gas, but I still stopped.  That's how hot it was!  I thought these hard boiled eggs, sealed in a bag, looked like a great snack.  I'd never seen that before, so figured I ought to document it, before hitting the road again.


No, this is not a laundromat.  Just as I let off the gas to take the freeway exit for Highway 12, the engine sputtered and died!  Fortunately, the small town of Forsyth is located right at the junction.  I coasted down the off ramp and directly into the Ford dealership parking lot.  But no, this is not the Ford dealership either.  I examined the bike a bit, but found nothing amiss.  Oil - check.  Coolant - check.  Lights - check.  After waiting a few minutes for the motor to cool, I tried to start it again - and it fired right up!  Hmmm. 

I made a few laps around the empty lot and it sounded fine.  There was only one thing I could think of that it must be - the fuel filters.  Last winter, I had read about their propensity to clog up much earlier in the life of the bike than you would think.  Some paranoid owners were changing them after only 12,000 miles.  My KTM had almost three times that many. 

Of course, It was Sunday, and the Ford shop was closed - as was, most likely, everything else in town.  Perhaps the filters were still only partly clogged.  I was done with the freeway for the rest of the day at least.  Maybe at the lower speed limits of Highway 12, which I'd follow all the way through Helena, the fuel would flow just fine.  I could make it there for the night, and have the KTM shop swap them out for me in the morning.  I did, in fact, have the spare parts with me.  I'd thought seriously about changing them before I left - until I discovered how big of a job it would be!    

I decided to head down the highway and see how it went.  I made it about five miles - to the first hill.  About half way up, it started cutting out again.  I was able to keep it from dying this time, but I knew I had to turn around.  Back in town, I noticed an open garage style door in the middle of a railroad equipment yard.  I parked outside and walked in.


There were several offices inside with lights on and air conditioners running - but not a soul in sight.  By this time, I knew I'd have to do the work myself.  I just needed a shady, reasonably clean place to do it.  The shade was the primary factor, as it was now well over 100 degrees outside!  After waiting several minutes for someone to show, I noticed the phone numbers scrawled on the wall by the telephone.  They were labeled, "Dispatcher."  Figuring the roll of a dispatcher is to be on call, 24-7, I called the first number - nothing.  I called the second number - nothing.

Someone had to show up eventually, and it would make the perfect bike workshop, so I hated to abandon my post.  I was also afraid of getting stranded back out in the sun, and having to push the bike somewhere.  I seriously considered just starting the job - and hoping for the best.  You know, it's easier sometimes to get forgiveness than permission, they say.


I ended up waiting at the railroad shop for over an hour, but finally gave up.  I considered the motels in town, but none had a nice place to work.  And by this time, I'd realized that I would need a large gas jug into which I could drain my nearly full gas tank.  I had also become concerned that I might not have all the tools I needed, having never done this particular task before.  No, I'd need to find a shop of some kind.

I started the bike again, and rode a few blocks to the gas station, where I figured I could get some advice - or at least a cold drink.  The attendant gave me a couple of numbers for local auto mechanics, and I opened my phone and began dialing the first one.  I was putting it up to my ear, when I heard her exclaim, "Here he is now!  Larry, this guy was just asking me about a place he could work on his motorcycle."

Turns out Larry was heading to his shop right then.  "Just follow me," he offered.  I explained the situation - that I didn't know how long it would take, but that it wouldn't be quick.  "To be honest," I continued, trying to prepare him for the worst, "I may not be able to finish today."  He pointed me to a bare spot on the floor, and soon I had all my luggage off, and was ready to dig in.  "I'll be in my office if you need anything," Larry said.  And then he was gone.


The book says you have to disconnect all the fuel hoses and completely remove the left tank - yes, there are two gas tanks.  I figured I could do it by only removing the lower bolts and hose, and swinging the tank out far enough to remove the fuel pump assembly, while leaving the tank on the bike, and most of the lines connected.  I figured the more of the fuel system I left intact, the less chance there would be for leaks, once I got it all back together.  The down side was that I had to do more of the work on my back. 

Once I got the pump out of the bottom of the tank (draining it first, of course) I was able to take it to Larry's rolling work bench, so that I could completely disassemble it to get to the two filters inside.  I'd seen pictures of this online, and it helped quite a bit.  At least I knew what I was looking for.  In the photo, I'm holding the base of filter number two, the tougher one to access.  That yellow/brown pleated cylinder is supposed to be white! 

Filter number one was even worse.  It was jet black - easier to get off, but much harder to get the new one back on.  It's mounting ring was made of plastic, and I had to force it so hard that I was afraid I would break it.  That would have meant waiting days for a new part.  In addition to the filters, there were several rubber O-rings that I replaced, and then the jigsaw puzzle had to all be put back together in exactly the right way. 

When I finally had the pump ready to install again, it was getting quite late.  I reported my progress to Larry, who was now watching TV on his couch.  I offered to come back in the morning and finish, so he could go home - having realized a while back that I would be spending at least one night in Forsyth.  He wanted me to continue, so back into the shop, I went.


At 8 PM, I finally got that orange tubular crash bar reinstalled - the last step!  I'd been working for over four hours, nonstop, and was completely exhausted.  I rolled the bike outside and started it to check for leaks.  Much to my relief, I found none.  I told Larry I'd drag all my gear outside and load up there.  I knew that would take another 20 minutes, and didn't want him to have to wait anymore.


Outside the shop, all ready to go, just before sunset - he had refused cash, so I'd offered to buy us supper.  Larry was a man of few words, at least that day, but his actions spoke volumes.  He suggested we meet for breakfast instead, at a restaurant right behind the gas station where we'd met.  "I'll be there," I assured him.  We shook hands, and Larry locked up and drove off.


By the time I'd checked in to the Sundowner Inn, all the restaurants in town were closed.  Somehow, I'd ended up telling my story to a couple of interested locals at the front desk.  It didn't score me a great deal on the room, but it did get me one with a lighted parking spot, right outside the window.

For supper, it was back to the gas station for prepackaged sandwiches and two quarts of Powerade.  I filled the attendant in on the afternoon's successful activities and thanked her for introducing me to Larry.  Back in my room, I took a long shower, ate my supper, called home, and consulted the map for my route ahead.  I hadn't gotten any laundry done, but I was glad I hadn't taken that additional road to Kinoosao.  That uneasy feeling I'd had about the bike back in Thompson, and my decision to head for home, was now justified.  I was no longer ahead of schedule, but I still shouldn't have any trouble making it home on time. 

Unless - even though the fuel filters were very dirty, it was the air filter that was causing the biggest problem?  With all the truck traffic on the Gillam road, I had ridden through much more dust than usual.  I hadn't even thought to check that.  It's buried almost as deeply as the fuel filters, but at least I had done that before.  I'd find out in the morning - on that same hill - about five miles outside of town.






No comments:

Post a Comment